Whatsapp ID: +86 13532830851
Email ID
sales@jactonindustry.com
Wechat ID: jactonjackSkype ID: jactonjack
Screw Jacks,Gearboxes,Actuators,Lifting Systems Manufacturers

Products

10 ton Stainless Steel Screw Jacks

Based on operating capacity for loads of 25% to 100% of screw jack capacity, torque requirements are approximately proportional to the load. Efficiency values for standard grease lubricated worm gear box and lifting screw. Ideally suited to perform in harsh environments (wet/dusty/dirty). Corrosion resistant models can be used in chemically adverse environments.

10 ton Stainless Steel Screw Jacks Key Features
1. Model JSS-10T,Maximum static load 10 Ton. 
2. Lifting screw sizes Tr 58x12. Customized stroke length.
3. Translating, anti-rotation (keyed) and rotating screw configurations.
4. High ratio 8:1, Medium ratio 12:1, Low ratio 24:1.
5. The 10 ton stainless steel screw jacks can be connected together in systems so that multiple units can be operated and controlled together.  
6. Hand crank manual operation, Electric motor driven or both together. 



10 ton Stainless Steel Screw Jacks Components Materials
1. Lifting screw: stainless steel 304
2. Input worm shaft: stainless steel 304
3. Worm gear or travelling nut: bronze
4. Housing: stainless steel 304
5. Bearings: bearing steel as standard. If underwater application, required stainless steel 304 bearing
6. Covers of input worm shaft: stainless steel 304
7. Top covers of housing: stainless steel 304
8. Protective tube: stainless steel 304
9. Locking screws: stainless steel 304
10. Lifting screw ends (top plate, clevis end, threaded end, plain end, fork end or rod end): stainless steel 304
11. Motor flanges: stainless steel 304

10 ton Stainless Steel Screw Jacks Drawing Dimensions
About 2D Autocad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings, please contact Jacton Industry directly.


10 ton Stainless Steel Screw Jacks Specifications

* Note: The dark gray figures in the tables indicates operational restrictions due to thermal limits. Static only (dynamic not permitted). Selection of screw jacks using these figures should only be carried out in consultation with our engineers. When your selection is made within the areas dark gray, you will need to reduce duty cycle or choose larger model screw jacks in order to allow effective heat dissipation.
* Conditions: Duty cycle 20%/h or 30%/10min, 20 °C ambient temperature. 
* Gear Ratios: H: high ratio, L: slow ratio.
* Nm: Input torque required, kW: Input power required.